Loading products…
| Image | Part Number | Manufacturer | Description | Series | Packaging | Mounting Type | RoHS Status | Manufacturer Part Number | Type | Package / Case | Polarization | Base Part Number |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TS861IN | STMicroelectronics | IC COMPARATOR R-R MCRPWR 8-DIP | - | Tube | Through Hole | - | - | General Purpose | 8-DIP (0.300", 7.62mm) | - | TS861 | |
| ADCMP582BCPZ-R2 | ADI (Analog Devices, Inc.) | IC COMPARATOR PECL UFAST 16LFCSP | - | Tape & Reel (TR) | Surface Mount | - | - | with Latch | 16-WFQFN Exposed Pad, CSP | - | ADCMP582 | |
| MAX903EPA | Maxim Integrated | IC COMPARATOR VOLT 8-DIP | - | Tube | Through Hole | - | - | with Latch | 8-DIP (0.300", 7.62mm) | - | MAX903 | |
| MAX516BENG | Maxim Integrated | IC COMP QUAD PROGR THRES 24-DIP | - | Tube | Through Hole | - | - | General Purpose | 24-DIP (0.300", 7.62mm) | - | MAX516 | |
| MAX966ESA+ | Maxim Integrated | IC COMPARATOR R-R 8-SOIC | - | Tube | Surface Mount | - | - | General Purpose | 8-SOIC (0.154", 3.90mm Width) | - | MAX966 | |
| BA10393N | LAPIS Semiconductor | IC COMPARATOR DUAL 18V SIP8 | - | Tube | Through Hole | - | - | General Purpose | 8-SIP | - | BA10393 | |
| LT6703HDC-3 | ADI (Analog Devices, Inc.) | IC COMPARATOR | Over-The-Top® | - | Surface Mount | - | - | General Purpose | 3-WFDFN Exposed Pad | - | - | |
| TLC3702CD | N/A | IC DUAL V COMP 8-SOIC | LinCMOS™ | Tube | Surface Mount | - | - | General Purpose | 8-SOIC (0.154", 3.90mm Width) | - | TLC3702 | |
| NCV2252SN2T1G | AMI Semiconductor / ON Semiconductor | SINGLE OPEN DRAIN OUTPUT | Automotive, AEC-Q100 | Tape & Reel (TR) | Surface Mount | - | - | General Purpose | SOT-23-5 Thin, TSOT-23-5 | - | - | |
| LT1719CS8#TRPBF | ADI (Analog Devices, Inc.) | IC COMP R-R I/O SGL 3/5V 8-SOIC | UltraFast™ | Tape & Reel (TR) | Surface Mount | - | - | General Purpose | 8-SOIC (0.154", 3.90mm Width) | - | LT1719 |
Comparators are fundamental linear electronic devices used to compare two voltage signals and produce a digital output indicating which input is greater. They are widely used in various applications such as voltage level detection, waveform shaping, signal conditioning, and triggering in electronic circuits. Comparators operate by amplifying the voltage difference between their inputs and driving the output to a logic high or low state based on the comparison result. They are available in different configurations and with various performance characteristics to suit specific application requirements in areas such as instrumentation, control systems, audio processing, and power management.